77
This year our Company presented a novelty to the market – a storage bunker reloader BNP-20/2
Now in the Egritech lineup there are 2 models BNP-20 and BNP-20/2
These two models of bunkers have a number of differences, which we summarized in the table “Comparison of BNP with a volume of 20 m3”
| Parameter name | BNP-20 | BNP-20-2 |
| Full weight, kg, not less | 22600 | 22000 |
| Mass equipped, kg, not more | 5600 | 6850 |
| Carrying capacity, kg, not more | 17000 | 15150 |
| Hopper body volume, m3 | 22 | 22 |
| Number of axles, pcs. | 1 | 2 |
| Number of screws, pcs. | 1 | 2 |
| Characteristics of augers: | 2-piece, diam. 400 mm, top folds down | horizontal: dia. 400 mm vertical: in 2 parts, diam. 500 mm, top folds down |
| Overall dimensions, mm, no more: | 6000*4100*3850 | 8200*2600*3785 |
| Board height from the loading side, mm, no more | 3500 | 3345 |
| Hanger | hard (absent) | tandem type, double axle, dependent with leaf springs and jet rods |
| Tires: | ||
| type | tubeless | tubeless |
| size | 650/65R42, 650/75R32 or 24.5-32 | 550/60-22.5 or 560/60R22.5 |
| Wheels | disk DW20A or DW21B | disk 16.00*22.5 |
| Rear overhang angle, degree, not less | 45 | 15 |
| Brakes: | ||
| type | hydraulic or pneumatic | hydraulic or pneumatic |
| supply | from the hydraulic system of the tractor or from the pneumatic system of the tractor | from the hydraulic system of the tractor or from the pneumatic system of the tractor |
| service brake system | with single line hydraulic actuator or double-wire pneumatic actuator | with single line hydraulic actuator or double-wire pneumatic actuator |
| brakes | drum with inner pads | drum with inner pads |
| parking brake system | mechanical drive through a cable to the wheels of the front axle | mechanical drive through a cable to the wheels of the front axle |
| Hydraulic system: | ||
| drive unit | tractor hydraulic system | ttractor hydraulic system |
| maximum pressure in the hydraulic system, MPa (bar), | no more 22 (220) | no more 22 (220) |
| Horizontal Auger Cleaning Mechanism | in stock | in stock |
| Cleaning mechanism for vertical auger | in stock | in stock |
| Adjusting the angle of inclination of the vertical auger tray | hydraulic | hydraulic |
| Bunker unloading time (nominal), min. | 4 | 4 |
| Drawbar support, type | hydraulic, height adjustable | hydraulic, height adjustable |
| Awning: | polymer, elastic, waterproof, hand-wound | polymer, elastic, waterproof, hand-wound |
| Stairs | stationary, foldable, on the right side | stationary, folding, behind |
As you can see from the table, there are many differences. But the main differences are the number of axles and augers.
The number of augers determines the shape of the tractor trailer itself. BNP-20 has the shape of an inverted pyramid. This is done so that the harvested crop, under the force of gravity and its own weight, is fed to the reloading auger. But, such a shape makes the reloading hopper large in overall dimensions. Accordingly, it makes it impossible to move this technique on public roads. It can only be transported on a trawl with a special permit.
Unlike BNP-20, the new model has 2 augers – horizontal and vertical. This allowed the developers to maintain the volume of the body, at the same time, to make the dimensions smaller in width. This allows the tractor trailer to travel on public roads.
Also a different number of axles. There is a constant discussion among specialists how many axles are better to have. According to our observations, single-axle trailers are best used in areas where there is an extensive network of irrigation canals, since the storage bunker passes them “easier”. Biaxial BNP, according to our observations, are more suitable for working in fields that are on slopes.
On our website you can choose such a storage bunker, a reloader that ideally suits your conditions for doing agribusiness.
Regardless of which transfer hopper you choose, you will certainly get up to 30% increase in harvesting speed.
